page
Store Locator

Beaver 3S Industrial Manual Chain Blocks with Overload Protection (6m Standard Lift)

Product Code: MH5086

Unit Description
Each
Downloads
Data Sheet
  • Description
  • Warranty, Return & Exchange Policy
  • Shipping Info

Beaver 3S industrial chain blocks with overload protection are designed for use on monorails, jibs fixed installations and for maintenance use. These chain blocks or hoists are to be used for vertical lifts only. If they are side loaded or used horizontally, jamming of the loader chain and damage to the blocks may occur. The Beaver 3S industrial chain blocks  features a double pawl and double roller guide for enhanced performance and reliability, as well as a unique curling design which enables the hand chain to successfully feed directly into the wheel sprocket.

Product Features:

  • Full Body Steel cast construction, gear case and reinforced side covers are impact resistant
  • Overload protection for added safety
  • Unique design on top and bottom hooks with ball bearings and safety catches
  • Beaver 'ID' plates and rivets are supplied in stainless steel (a non-conductive material) in order to avoid dangerous sparking,
  • Comprehensive range of spare parts are available
  • Every 3S Chain Block Steel Pro 250kg is identified with its own serial number that relates directly to a test certificate

Materials:

  • Heavy duty steel
  • G80 Calibrated load chain
  • Robust cast steel housing
  • Ball bearings in top & bottom hooks

Applications:

  • Mining
  • Rigging and Construction
  • General Purpose
  • Industrial use
  • Mechanical

Approved Standards:

  • Complies to AS/NZS 1418.2
  • Grade 80 Calibrated Chain and marked according to ISO 3077.
Product Code Rated Capacity Colour Code Standard Lift Effort on Lever to Lift Full Load No. Load Chain Falls Load Chain Diameter
508056 0.5t White 6m 240kg 1 5mm x 15mm
508106 1t Violet 6m 250kg 1 6mm x 18mm
508206 2t Green 6m 335kg 1 8mm x 24mm
508306 3t Yellow 6m 335kg 2 8mm x 24mm 
508506 5t Red 6m 363kg 2 9mm x 30mm 
508606 10t Orange 6m 380kg 4 9mm x 30mm 

These chain blocks are colour coded to match international lifting standards for fast and accurate identification of WLL. Every chain block is also operationally tested to its rated capacity and is supplied with a Beaver test certificate, relating to its stamped identification side plate.

Product Code Rated Capacity A B C H Net Weight
508056 0.5t 132mm 148mm 28mm 345mm 12.6kg
508106 1t 151mm 172mm 32mm 376mm 14.8kg
508206 2t 175mm 210mm 36mm 470mm 23.6kg
508306 3t 176mm 230mm 46mm 565mm 37.2kg
508506 5t 189mm 280mm 46mm 688mm 54.5kg
508606 10t 189mm 463mm 57mm 765mm 104.9kg

For technical drawings of these lever blocks, please see the linked data sheet below.

For more information on our materials handling range, please contact our Customer Care team.

Warranty:

Returns will be accepted for faulty or defective goods and any other non-excludable obligations of Beaver Brands set out in The Competition and Consumer Act 2010, Schedule 2, Australian Consumer Law or similar State and Territory legislation.

Returns are subject to customer following Beaver Brands' recommended care and maintenance instructions which can be found on the garments swing tag. Beaver Brands garments found to be faulty will be replaced at no cost.

Items that are sourced from 3rd party distributors will carry their own manufacturer’s warranty.

Returns/Exchange Policy:

Beaver Brands to be notified within 7 days from receipt of order for any products that are to be returned/exchanged.

Before any items are returned the following steps need to be actioned:

  • Complete Return Authorisation Form (RAF)
  • Obtain a Return Authorisation Number
  • Forward the garments with the (RAF) form to the specified Beaver Brands branch
  • Goods will be inspected and credited off your account once approved

Please Note: Beaver Brands must approve all returns before they are forwarded back to the designated branch. These authorised returns must be freight prepaid and will only be accepted if they are in a saleable condition. Products specifically purchased, manufactured, machined or cut to size or to your company’s specification are not returnable unless prior approval has been given.

Please contact customercare@beaver.com.au to find out your FIS threshold.

Orders typically ship within 1 working day from our National Distribution Centre located in Erksine Park, NSW.

Downloads
Data Sheet
Technical Specifications
Category Beaver
Category Chain & Lever Blocks
Brand Material Handling