page
Store Locator

Beaver Electric Single Phase Winches - 240v

Product Code: MHBPLI

Unit Description
Each
Downloads
Data Sheet
  • Description
  • Warranty, Return & Exchange Policy
  • Shipping Info

The Beaver Single Phase Electric Winch is ideal for use as a fixed boat ramp winch or for trades who need to haul loads, cables, or other equipment. They are easy to set up and operate.

Note:- No low voltage controls

Product Features:
  • 240V industrial motor
  • Heavy duty construction and quality gear box
  • 24V, IP65 pendant control
  • Emergency stop function
  • Cast steel foot mountings
  • Enclosed drum flanges to prevent rope becoming trapped between drum and support steel plates
Approved Standards:
  • Complies to AS1418.2 Section 8
Product Code Rated Capacity Speed Motor Power % ED Effective Pull Height Wire Rope Diameter x Length Weight
BPL1025 0.25t 10-15m/min 1.0HP 25 29m 6mm x 30mm 40kg
BPL1030 0.3t 10-15m/min 1.5HP 25 29m 7mm x 30mm 49kg

The connection of the wire rope to the winch drump is via set screw, to ensure rope retention.

Rated Capacity A B C D E F
0.25t 4mm x 10.5D 142mm 142mm 525mm 210mm 246mm
0.3t 4mm x 10.5D 172mm 142mm 540mm 210mm 246mm

For more information on our materials handling range, please contact our Customer Care team.

Warranty:

Returns will be accepted for faulty or defective goods and any other non-excludable obligations of Beaver Brands set out in The Competition and Consumer Act 2010, Schedule 2, Australian Consumer Law or similar State and Territory legislation.

Returns are subject to customer following Beaver Brands' recommended care and maintenance instructions which can be found on the garments swing tag. Beaver Brands garments found to be faulty will be replaced at no cost.

Items that are sourced from 3rd party distributors will carry their own manufacturer’s warranty.

Returns/Exchange Policy:

Beaver Brands to be notified within 7 days from receipt of order for any products that are to be returned/exchanged.

Before any items are returned the following steps need to be actioned:

  • Complete Return Authorisation Form (RAF)
  • Obtain a Return Authorisation Number
  • Forward the garments with the (RAF) form to the specified Beaver Brands branch
  • Goods will be inspected and credited off your account once approved

Please Note: Beaver Brands must approve all returns before they are forwarded back to the designated branch. These authorised returns must be freight prepaid and will only be accepted if they are in a saleable condition. Products specifically purchased, manufactured, machined or cut to size or to your company’s specification are not returnable unless prior approval has been given.

Please contact customercare@beaver.com.au to find out your FIS threshold.

Orders typically ship within 1 working day from our National Distribution Centre located in Erksine Park, NSW.

Downloads
Data Sheet
Technical Specifications
Category Beaver
Category Hoists & Winches
Brand Material Handling