page
Store Locator

Beaver Push Girder Trolleys

Product Code: MH5220S

Unit Description
Each
  • Description
  • Warranty, Return & Exchange Policy
  • Shipping Info

Beaver Close Headroom Geared Girder Trolleys are used for applications where reduced headroom is required and are suited for heavier loads, higher suspension levels, or high use applications. 

The units suit varying flange widths up to a maximum of 350mm with the simple addition or subtraction of spacers or nuts on a suspension pin

These girder trolleys are lightweight, despite their robust all-steel construction and have been operationally tested to 150% of their rated capacity.

Note:-Beaver Close Headroom Geared Trolleys are not designed for passenger elevator applications and must not be used for this purpose. Selection and calculation of the proper beam construction is the responsibility of the user.

Features:

  • Fully adjustable
  • Hand chain features a special corrosion resistance zinc dichromate (gold) finish
  • Anti-tilt blocks fitted as standard for additional safety
  • Colour coded to match international WLL lifting standards
  • Stainless steel ID plate for traceability
Approved Standards:
  • Complies to AS 1418.2
Product Code Rated Capacity Colour Code Proof Load Minimum Radius Curve Net Weight Q (mm)
522005S 0.5t White 7.35kN  0.8m 6.5kg 35.5
522010S 1t Violet 14.71kN 1m 10.5kg 41
522015S 1.5t Orange 22.06kN 1m 17.5kg 43
522020S 2t Green 29.42kN 1.1m 17.5kg 48
522030S 3t Yellow 44.13kN 1.3m 27kg 54
522050S 5t Red 61.29kN 1.4m 41kg 69

Each Beaver girder trolley has an individual serial number stamped on the stainless steel identification plate. This number coincides directly to the test certificate of the product (which is provided), for quick and easy tracing and reference. These products are also operationally tested to 150% of its rated capacity.

Product Code Rated Capacity A B C D E F
522005S 0.5t 245mm 199mm 187mm 34mm 30mm 1.5-3mm
522010S 1t 311mm 246mm 222mm 40mm 38mm 1.5-3mm
522015S 1.5t 338mm 260mm 238mm 45mm 38mm 1.5-3mm
522020S 2t 327mm 276mm 263mm 52mm 38mm 1.5-3mm
522030S 3t 445mm 332mm 309mm 58mm 40mm 1.5-3mm
522050S 5t 457mm 377mm 353mm 64mm 42mm 2-3.5mm
Rated Capacity G H I J L1 M
522005S 0.5t 24mm 105mm 79mm 55mm 100mm 50-152mm
522010S 1t 30mm 125mm 95mm 68mm 120mm 64-203mm
522015S 1.5t 33mm 134mm 102mm 74mm 125mm 74-203mm
522020S 2t 36mm 150mm 108mm 80mm 132mm 88-203mm
522030S 3t 42mm 171mm 131mm 100mm 155mm 100-305mm
522050S 5t 48mm 196mm 144mm 110mm 168mm 114-305mm

For more information on our materials handling range, please contact our Customer Care team.

Warranty:

Returns will be accepted for faulty or defective goods and any other non-excludable obligations of Beaver Brands set out in The Competition and Consumer Act 2010, Schedule 2, Australian Consumer Law or similar State and Territory legislation.

Returns are subject to customer following Beaver Brands' recommended care and maintenance instructions which can be found on the garments swing tag. Beaver Brands garments found to be faulty will be replaced at no cost.

Items that are sourced from 3rd party distributors will carry their own manufacturer’s warranty.

Returns/Exchange Policy:

Beaver Brands to be notified within 7 days from receipt of order for any products that are to be returned/exchanged.

Before any items are returned the following steps need to be actioned:

  • Complete Return Authorisation Form (RAF)
  • Obtain a Return Authorisation Number
  • Forward the garments with the (RAF) form to the specified Beaver Brands branch
  • Goods will be inspected and credited off your account once approved

Please Note: Beaver Brands must approve all returns before they are forwarded back to the designated branch. These authorised returns must be freight prepaid and will only be accepted if they are in a saleable condition. Products specifically purchased, manufactured, machined or cut to size or to your company’s specification are not returnable unless prior approval has been given.

Please contact customercare@beaver.com.au to find out your FIS threshold.

Orders typically ship within 1 working day from our National Distribution Centre located in Erksine Park, NSW.

Technical Specifications
Category Beaver
Category Trolleys & Clamps
Brand Material Handling